banahCEM product range is a new group of low-carbon cements based on a geopolymeric binder system. They have been specifically developed to produce products that are resistant to chemical and heat attack or may be used as a low-carbon replacement for Portland cements.

 
 
tunnel.jpg

banahCEM Acid

banahCEM ACID is a geopolymer cement that is optimised for acid resistance for applications that result in exposure to acidic environments where low pH levels would cause significant damage to Portland cement.

In addition to the normal benefits offered by a geopolymer cement, banahCEM is characterised by a rich terracotta colour.

 

 

 

TECHNICAL INFORMATION

 

Uses

banahCEM ACID IS AN INGREDIENT WHICH CAN BE UTILISED IN NUMEROUS PRODUCTS WHICH HAVE APPLICATIONS ACROSS A WIDE RANGE OF INDUSTRIES, SPECIFICALLY  WHERE ACID EXPOSURE IS A CONCERN. SEE BELOW FOR EXAMPLES OF INDUSTRIES IN WHICH PRODUCTS ARE BEING DEVELOPED TO TAKE ADVANTAGE OF THE BENEFITS OF banahCEM ACID:-

·      Suppliers of precast units
·      Concrete pipe manufacturers
·      Agricultural industries
·      Anaerobic Digesters (AD Plants)
·      Waste treatment, containment and encapsulation
·      Environmentally sensitive construction
·      General engineering
·      High performance piling
·      Petrochemical Industry

 
square-test.jpg
 
level.png

HIGH PERFORMACE

banahCEM outperforms Portland cement in many circumstances.

test.png

CHEMICAL RESISTANCE

The absence of calcium compounds results in high resistance to sulfates

fire-symbol.png

FIRE RESISTANCE

banahCEM has been extensively fire tested and remains stable at more than twice the failure temperature of typical Portland cements.

anchor.png

HIGH STRENGTH

banahCEM’s strength can be designed to a client’s requirements with compressive strengths available in excess of 130N/mm2.

alarm-clock.png

RAPID STRENGTH GAIN

banahCEM achieves approx. 50% of its 28 day strength at 9 hours, allowing minimal down time on projects.

 
 
 

Environmental Impact

THE TRADITIONAL CEMENT INDUSTRY IS THE SECOND LARGEST PRODUCER OF CO2 GLOBALLY. WITH THE CONTINUED POPULATION BOOM AND THE ASSOCIATED DEMAND FOR CEMENTS AND CONCRETES, THIS IS ONE OF THE BIGGEST CHALLENGES THAT MEETS THE CONSTRUCTION INDUSTRY TODAY. THE SOLUTION, banahCEM, IS SETTING NEW ENVIRONMENTAL BENCHMARKS FOR THE CONSTRUCTION INDUSTRY BY COMPARISON WITH PORTLAND CEMENTS:-
 

  • 80% reduction in CO2 produced during the manufacturing process

  • a minimum of 60% less impact on the environment, as a result of the extraction of raw materials

  • the use of waste materials or by-products from existing industries
     

ITS LONG TERM DURABILITY IS A DIRECT CONSEQUENCE OF ITS REPLICATION OF NATURAL ROCK FORMATIONS, SUCH aAS BASALT.

 

Application

banahCEM IS SUPPLIED AS A TWO COMPONENT SYSTEM:–

1. banahCEM (a) – powder component
2. banahCEM (b) – hardener component

EXAMPLE MIX DESIGNS AND THEIR RESPECTIVE COMPRESSIVE STRENGTHS ARE AVAILABLE UPON REQUEST.

 

Storage

KEEP AT A TEMPERATURE NOT EXCEEDING 50oC AND DO NOT ALLOW THE MATERIAL TO FREEZE. PROVIDE AN ADEQUATE BUNDING FOR HARDENER CONTAINERS. ALUMINIUM CONTAINERS ARE UNSUITABLE FOR STORING banahCEM. banahCEM MAY BE STORED FOR A MAXIMUM OF 12 MONTHS AFTER THE DATE OF DELIVERY.

banahCEM (a) is packaged and transported in 1m3 bags and 26 tonne tanker loads.
banahCEM (b) is available in 1000 liter IBC’s and 26 tonne tanker loads.

WHEN HANDLING banahCEM COMPONENTS, PLEASE OBSERVE PPE RECOMMENDATIONS GIVEN ON THE SAFETY DATA SHEET.

 
 

The information given in this technical datasheet is based on our current knowledge and is intended to provide general notes on our products and their uses. banah UK Ltd endeavours to ensure that the information given is accurate, but accept no liability for its use or its suitability for a particular application due to the product being used by the third party without our supervision.

 

For further details on banahCEM and its potential benefits to your business and your clients

 
joel-filipe-232485-unsplash-min.jpg